Passenger's Side

Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
Disconnect the negative battery cable.
Remove the cover, then remove the screw.
Detach clips B using a tape-wrapped flathead screwdriver.
Detach tab A by pulling it in the direction of the arrow, and remove the switch panel from the door trim.
Disconnect the power window subswitch connector.

Fig 1: Identifying Power Window Subswitch Components
Courtesy of MAZDA MOTORS CORP.
Remove the screws, then remove the power window subswitch.
Install in the reverse order of removal.

Fig 2: View Of Power Window Subswitch And Screw
Courtesy of MAZDA MOTORS CORP.