FixVault
Home › Mazda › 2009 › 5 Touring, 2.3 L › Repair and Diagnosis › Body & Frame › Windows › Glass/Windows/Mirrors › Sliding Door Quarter Glass Removal/Installation

Sliding Door Quarter Glass Removal/Installation

  1. Fully open the sliding door glass.
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] .)
  3. Disconnect the negative battery cable.
  4. Remove the sliding door garnish. (See SLIDING DOOR GARNISH REMOVAL/INSTALLATION .)
  5. Remove the side door garnish. (See SIDE DOOR GARNISH REMOVAL/INSTALLATION .)
  6. Remove the rear side trim. (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  7. Remove the sliding door trim. (See SLIDING DOOR TRIM REMOVAL/INSTALLATION .)
  8. Remove the bolt and screw.
    Fig 1: View Of Bolt, Screw With Torque Specifications
    G05545661Courtesy of MAZDA MOTORS CORP.
  9. Remove the rear door glass guide and glass run channel as a single unit.
    Fig 2: View Of Door Glass Guide And Glass Run Channel
    G05545662Courtesy of MAZDA MOTORS CORP.
  10. Remove the sliding door glass.
  11. Install in the reverse order of removal.
    Fig 3: View Of Sliding Door Glass Removed
    G05545663Courtesy of MAZDA MOTORS CORP.
About FixVault