FixVault
Home › Mazda › 2009 › 6 s Grand Touring › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Buckle Removal/Installation

Front Buckle Removal/Installation

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. . FRONT SEAT REMOVAL/INSTALLATION .
  4. Remove the front buckle connector.
  5. Remove the bolt.
  6. Remove the front buckle.
  7. Install in the reverse order of removal.
    Fig 1: Front Buckle And Bolt With Torque Specifications
    G06206103Courtesy of MAZDA MOTORS CORP.
About FixVault