Position Memory Control Module Removal/Installation

WARNING:

Handling a front seat (with built-in side air bag) improperly can accidentally operate (deploy) the air bag, which may seriously injure you. Read the service warnings before handling a front seat (with built-in side air bag). See AIR BAG SYSTEM SERVICE WARNINGS .

Operate the power seat switch and move the seat cushion forward and upward.
Disconnect the negative battery cable and wait 1 min or more.
Remove the driver-side front seat. See FRONT SEAT REMOVAL/INSTALLATION .
Remove in the order indicated in the table.

Fig 1: Identifying Memory Control Module, Screw And Connector
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.