FixVault
Home › Mazda › 2009 › 6 s Touring › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation › Front Inner Handle

Front Inner Handle

  1. Disconnect the negative battery cable
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
    Fig 1: Identifying Door Lock Switch Connector
    G06200872Courtesy of MAZDA MOTORS CORP.
  5. Disconnect each cable and remove the front inner handle.
    6. Fig 2: Identifying Front Inner Handle & Cables
    G06200873Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
About FixVault