FixVault
Home › Mazda › 2009 › CX-7 Touring, 2.3 L, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Clearing Card Key [Advanced Keyless Entry And Start System]

Clearing Card Key [Advanced Keyless Entry And Start System]

  1. Fully lower the driver-side door glass.
  2. Connect the M-MDS to the DLC-2.
    3. Fig 1: Identifying DLC-2 Connector
    G04861160Courtesy of MAZDA MOTORS CORP.
  3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
    CAUTION:
    • Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
  4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (notebook PC)
      1. Select "Body".
      2. Select "Security".
      3. Select "PATS Functions".
    • When using the PDS (pocket PC)
      1. Select "Programming".
      2. Select "PATS Functions".
  5. Then, select items from the screen menu in the following order.
    1. Card Key Code Erase and Program
  6. Security access begins and the M-MDS displays "OUT-CODE".
    NOTE:
    • When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times  will change the "OUT-CODE".
  7. Input the "IN-CODE" that corresponds to the "OUT-CODE" displayed in the M-MDS screen.
  8. Perform procedures according to the directions on the M-MDS screen.
  9. If the advanced key needs to be reprogrammed, program it according to the instructions on the M-MDS screen.
About FixVault