No. 7 Programming Procedure Due to Simultaneous Replacement of Immobilizer System-Related Parts (PCM, Keyless Control Module and Steering Lock Unit: Notes
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- The menu and execution sequence of the M-MDS vary depending on the type of replaced unit and parts. Perform the procedures referring to the following table.
M-MDS menu
(1): Parameter Reset
(2): Ignition Key Code Erase and Program
(3): Program Additional Card Key
(4): Steering Lock Unit Programming
| Replacement Part | M-MDS execution menu/sequence | Conditions | ||
|---|---|---|---|---|
| Keyless control module and PCM(1) | (1)->(2)->(3)->(4) |
|
||
| Keyless control module and steering lock unit(1) | ||||
| Keyless control module, PCM and steering lock unit(1) | ||||
| PCM and steering lock unit(1) | (1)->(2)->(4) | Have two or more keys to be programmed after the replacement | ||
|
||||