FixVault
Home › Mazda › 2009 › CX-7 Touring, 2.3 L, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Keyless Control Module Configuration [Advanced Keyless Entry And Start System]

Keyless Control Module Configuration [Advanced Keyless Entry And Start System]

  1. Connect the M-MDS to the DLC-2 connector.
    2. Fig 1: Identifying DLC-2 Connector
    G04861158Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Module Programming".
    • When using the PDS (pocket PC)
      1. Select "Programming".
      2. Select "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Module Installation".
    2. Select "RKE".
  4. Perform the configuration according to the directions on the screen.
  5. Retrieve DTCs by the M-MDS, then verify that there are no DTC present. If a DTC is present, perform the applicable DTC inspection. See DTC INSPECTION/IMMOBILIZER SYSTEM (ADVANCED KEYLESS AND START SYSTEM)]
About FixVault