FixVault
Home › Mazda › 2009 › CX-7 Touring, 2.3 L, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Security Access Procedure

Security Access Procedure

  1. Connect the M-MDS to DLC-2.
    2. Fig 1: Identifying DLC2 Connector
    G04861131Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • Using an IDS (laptop PC)
      1. Select "Body"
      2. Select "Security"
      3. Select "PATS function"
    • Using a PDS (Pocket PC)
      1. Select "Programming"
      2. Select "PATS functions"
  3. Select the items to be performed from the following:
    • "Program Additional card key"
    • "Card Key Code Erase and Program"
    • "Steering Lock Unit Programming"
    • "Program additional ignition key"
    • "Ignition Key Code Erase and Program"
    • "Customer Spare Key Programming Enable"
    • "Customer Spare Key Programming Disable"
    • "Parameter Reset"
  4. The security access begins and the M-MDS displays the "OUT-CODE".
    NOTE: When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".
  5. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
  6. If the security access is successful, selected item can be performed.
About FixVault