FixVault
Home › Mazda › 2009 › CX-7 Touring, 2.3 L, FWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Theft Deterrent System Initialization Procedure › Verification after theft-deterrent system initialization

Verification after theft-deterrent system initialization

  1. Turn the ignition switch to the ON position.
  2. Fully lower the driver's door glass.
  3. Turn the ignition switch to the LOCK position and remove the key.
  4. Get out of the vehicle and close all the doors, bonnet, and liftgate.
  5. Press the transmitter LOCK button to lock all the doors and liftgate.
  6. Open the driver's door by turning the driver's door lock knob from the LOCK to UNLOCK position within approx. 10 s after Step 5 is performed and the hazard warning lights flash.
  7. The initialization is completed unless a warning alarm is triggered.
NOTE: If a warning alarm is triggered, the transition time setting from the initial mode to stand-by mode 1 has not been completed. In this case, repeat the theft-deterrent system initialization procedure.
About FixVault