Transmitter Battery Replacement [Keyless Entry System]

Insert a small flathead screwdriver into the transmitter notch and remove the key from the transmitter by pressing the tab.

Fig 1: Inserting Flathead Screwdriver Into Transmitter
Courtesy of MAZDA MOTORS CORP.
Insert a small flathead screwdriver into the transmitter notch and the transmitter.

Fig 2: Identifying Transmitter Notch
Courtesy of MAZDA MOTORS CORP.
Remove the battery.

Fig 3: Removing Battery
Courtesy of MAZDA MOTORS CORP.
Install the new battery (CR1620) with the positive pole facing down.
Align the upper and lower cover and close the transmitter.
Used battery

Lithium battery CR1620

Battery life

Approx. 2 years (when used 10 times/day)
Install the key to the transmitter.
NOTE:
- When attaching the key to the transmitter, Squeeze them together until a click sound is heard.
- If the key is not securely attached it will separate from the transmitter.
Fig 4: Attaching Key To Transmitter
Courtesy of MAZDA MOTORS CORP.