Door Glass Adjustment

Fully close the door glass.
Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION )
Remove the door module panel. (See DOOR MODULE PANEL REMOVAL/INSTALLATION )
Connect the power window regulator connector.
Loosen the glass stopper installation bolts.
Loosen the power window regulator and door glass tightening nuts.
Align the door glass with the rear edge of the front beltline molding.

Fig 1: Identifying Glass Stopper, Power Window Regulator With Bolt And Nut
Courtesy of MAZDA MOTORS CORP.
NOTE:
- The standard position for the rear edge of the front beltline molding is 1 mm {0.04 in} from the rear edge of the door panel. If the standard position for the rear edge of the front beltline molding has deviated, align the rear edge of the door glass to the standard position for the rear edge position of the front beltline molding.
Lightly tighten the power window regulator and door glass tightening nuts.

Fig 2: Identifying Door Glass With Clearance
Courtesy of MAZDA MOTORS CORP.

Adjust the clearance between the upper edge of the door glass and the door glass guide.

STANDARD SPECIFICATION

Clearance	Standard	Minimum	Maximum
a	1.0 mm {0.04 in}	0 mm {0 in}	1.5 mm {0.06 in}

Fig 3: Identifying Door Glass, Door Glass Guide With Clearance

Courtesy of MAZDA MOTORS CORP.

Adjust the door glass position.

Fig 4: Identifying Door Glass Position
Courtesy of MAZDA MOTORS CORP.
Tighten the power window regulator and door glass tightening nuts.

Fig 5: Power Window Regulator And Door Glass With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Tighten the bolts while pressing the glass stopper in the direction of the arrows.
Verify that the door glass opens and closes smoothly.
Install the door module panel. (See DOOR MODULE PANEL REMOVAL/INSTALLATION )
Install the door trim. (See DOOR TRIM REMOVAL/INSTALLATION )
Close the door with the convertible top, detachable hardtop, or power retractable hardtop closed and verify that the door glass opens and closes smoothly.

Fig 6: Pressing Glass Stopper And Bolts With Torque Specifications
Courtesy of MAZDA MOTORS CORP.