FixVault
Home › Mazda › 2009 › RX-8 R3, 1.3 4 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

  1. Remove the rear seat cushion. (See REAR SEAT REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
    Fig 1: Identifying Rear Seat Cushion
    G05985622Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
About FixVault