FixVault
Home › Mazda › 2009 › RX-8 Touring, 1.3 2 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Buckle Switch Inspection › Passenger-Side

Front Buckle Switch Inspection: Passenger-Side

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Verify continuity as indicated in the table.
    • If not as indicated in the table, replace the front buckle.
    Fig 1: Continuity Chart
    G05985618Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Buckle Switch Connector
    G05985619Courtesy of MAZDA MOTORS CORP.
About FixVault