Kc13 Check The Fuel Pump Control Module For Correct Operation

Measure the voltage between:

( + ) FP Connector, Harness Side	( - ) FP Connector, Harness Side
FPPWR	FPRTN

Access the PCM and control the FP PID.
Command the FP PID ON.
Is the voltage greater than 10 V with the PID commanded ON?
- Yes: INSTALL a new FP. REFER to the FUEL TANK AND FUEL FILLER PIPE EXPLODED VIEW -- HYBRID .
  CLEAR the DTCs. REPEAT the self-test.
- No: INSTALL a new Fuel Pump Control Module. REFER to the FUEL CHARGING AND CONTROLS -- HYBRID .
  CLEAR the DTCs. REPEAT the self-test.