FixVault
Home › Mazda › 2009 › Tribute s Touring, FWD › Repair and Diagnosis › Engine Performance › System › Symptom Troubleshooting [Non-Hybrid Engine) › Quick Test › Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

  1. Carry out the necessary vehicle preparation and visual inspection. Hook-up the IDS or equivalent tester to the vehicle.
  2. Connect the IDS or equivalent tester to the vehicle DLC-2 16-pin connector located on the left side of the center console.
    Fig 1: Identifying DLC-2 16-Pin Connector
    G05463673Courtesy of MAZDA MOTORS CORP.
  3. Record the freeze frame PID data by IDS or equivalent tester.
About FixVault