FixVault
Home › Mazda › 2010 › 3 Mazdaspeed, 2.3 4 › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Door Lock Switch Inspection

Door Lock Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Remove the front inner handle. (See INNER HANDLE REMOVAL/INSTALLATION .)
  5. Inspect for continuity between the door lock switch terminals using an ohmmeter.
    Fig 1: Inspecting Door Lock Switch
    G06731891Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the door lock switch.
      Fig 2: Resistance Chart
      G06731892Courtesy of MAZDA MOTORS CORP.
About FixVault