Power Window SUBSWITCH Inspection: Rear

Disconnect the negative battery cable.
Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
Remove the power window subswitch. (See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY .)
Verify that the continuity is as indicated in the table using a tester.
- If not as indicated in the table, replace the power window subswitch.
  
  Fig 1: Power Window Subswitch Terminals Continuity Chart
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Inspecting Power Window Subswitch Terminals Continuity
  Courtesy of MAZDA MOTORS CORP.