FixVault
Home › Mazda › 2010 › 5 Sport, 2.3 3, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System [L3] › Crankshaft Position (CKP) Sensor Inspection › Visual Inspection

Visual Inspection

  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Perform the following procedure for easier access.
    1. Remove the under cover.
    2. Remove the splash shield.
  4. Disconnect the CKP sensor connector.
  5. Remove the CKP sensor.
  6. Verify that there are no metal shavings on the CKP sensor.
    • If there is a malfunction, replace the CKP sensor.
About FixVault