FixVault
Home › Mazda › 2010 › 6 i SV, 2.5 A › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (L5) › Manifold Absolute Pressure (Map) Sensor Removal/Installation [L5]

Manifold Absolute Pressure (Map) Sensor Removal/Installation [L5]

  1. Disconnect the negative battery cable.
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [L5] .)
  3. Disconnect the MAP sensor connector.
  4. Remove the MAP sensor.
  5. Install in the reverse order of removal.
    Fig 1: MAP Sensor Connector & Intake Manifold With Torque Specifications
    G06205243Courtesy of MAZDA MOTORS CORP.
About FixVault