FixVault
Home › Mazda › 2010 › 6 i SV, 2.5 H › Repair and Diagnosis › Engine Performance › System › Symptom Troubleshooting [Engine L5] › Engine Control System Operation Inspection [L5] › Electronic Throttle Control System › Variable Tumble Control Operation Inspection › Notes

Variable Tumble Control Operation Inspection: Notes

  1. Connect the M-MDS to the DLC-2
  2. Access ECT PID
  3. Verify that ECT PID is between 60°C {145°F} and 67°C {153°F} 
  4. Start the engine
  5. Inspect rod operation under the following conditions
About FixVault