FixVault
Home › Mazda › 2010 › 6 i Touring Plus, 2.5 H, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (L5) › Intake Air Temperature (IAT) Sensor Inspection [L5] › Resistance Inspection

Resistance Inspection

  1. Disconnect MAF/IAT sensor.
  2. Measure the resistance between the MAF/IAT sensor terminals D and E using an ohmmeter.
    • If not as specified, replace the MAF/IAT sensor. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L5] .)
      SPECIFICATION

      Ambient temperature (°C {°F}) Resistance (kilohm)
      -20{-4} 13.6-18.4
      20{68} 2.21-2.69
      60{140} 0.493-0.667
      Fig 1: Identifying Intake Air Temperature Sensor Connector Terminals
      G06205242Courtesy of MAZDA MOTORS CORP.
About FixVault