FixVault
Home › Mazda › 2011 › 2 Touring, 1.5 Y, Automatic › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System › DSC HU/Cm Inspection › Notes

DSC HU/Cm Inspection: Notes

  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5] .)
  3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect the voltage, continuity, or resistance according to the standard (reference value) in the table below.
About FixVault