FixVault
Home › Mazda › 2011 › 2 Touring, 1.5 Z, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Liftgate Opener Switch Inspection

Liftgate Opener Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  3. Remove the liftgate opener switch. (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION .)
  4. Verify the continuity of liftgate opener switch terminals A and B.
    Fig 1: Liftgate Opener Switch Circuit
    G06942088Courtesy of MAZDA MOTORS CORP.
  5. Verify that the continuity is as indicated in the table.
    Fig 2: Liftgate Opener Switch Terminal Continuity Chart
    G06942089Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the liftgate opener switch.
About FixVault