DTC P2229:00: Notes
DTC P2229:00 (MZR 1.5) DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2229:00 |
BARO sensor circuit high input |
| DETECTION CONDITION |
- The PCM monitors input voltage from the BARO sensor. If the input voltage is above 4.0 V
for 5 s
, the PCM determines that the BARO sensor circuit has a malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- BARO sensor malfunction (built-in PCM)
- PCM malfunction
|