Power Window SUBSWITCH Inspection: Rear

Disconnect the negative battery cable.
Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION ).
Remove the power window subswitch. (See REAR DOOR TRIM DISASSEMBLY/ASSEMBLY ).
Verify that the continuity is as indicated in the table using a tester.
- If not as indicated in the table, replace the power window subswitch.
  
  Fig 1: Power Window Subswitch Terminals Continuity Chart (Rear)
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying Power Window Subswitch Connector Terminals (Rear)
  Courtesy of MAZDA MOTORS CORP.