FixVault
Home › Mazda › 2011 › 3 Mazdaspeed, 2.3 3 › Repair and Diagnosis › External Pages › Different car › Section 566 (Power Systems) › Key Reminder Switch Removal/Installation

Key Reminder Switch Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Disconnect the key reminder switch connector.
    Fig 1: Identifying Key Reminder Switch And Key Reminder Switch Connector
    G06733182Courtesy of MAZDA MOTORS CORP.
  4. Detach the key reminder switch tabs.
  5. Remove the key reminder switch.
  6. Install in the reverse order of removal.
    Fig 2: Identifying Key Reminder Switch Tabs
    G06733186Courtesy of MAZDA MOTORS CORP.
About FixVault