Advanced Key Id Code Registration

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For a key that can start the engine, or no advanced key, the M-MDS can be used to force the ignition to switch is IG ON. (See FORCED IGNITION ON [WITH ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)

Fully lower the driver-side door glass.
Connect the M-MDS to the DLC-2.
Set the M-MDS outside the vehicle with its cable passing through the door glass opening.
CAUTION:
- Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.
  
  Fig 1: Identifying DLC-2 Location
  Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Using an IDS (laptop PC)
  1. Select "Body".
  2. Select "Security".
  3. Select "PATS Functions".
- Using a PDS (Pocket PC):
  1. Select "All Tests and Calibrations".
  2. Select "PATS Functions".
Select the following from the screen menu.
1. Select "Program Additional Advanced Key".
Perform the security access according to the directions on the M-MDS screen.