FixVault
Home › Mazda › 2011 › 3 Mazdaspeed, 2.3 3 › Repair and Diagnosis › External Pages › Different car › Section 586 (Security System And Locks System) › Request Switch Removal/Installation › Liftgate

Request Switch Removal/Installation: Liftgate

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the inboard light. (See INBOARD LIGHT REMOVAL/INSTALLATION .)
  3. Remove the screw.
    Fig 1: Identifying Inboard Light, Screw And Request Switch
    G06732003Courtesy of MAZDA MOTORS CORP.
  4. Remove the request switch.
  5. Install in the reverse order of removal.
About FixVault