FixVault
Home › Mazda › 2011 › 3 Mazdaspeed, 2.3 3 › Repair and Diagnosis › External Pages › Different car › Section 617 (Dynamic Stability Control) › DSC Off Switch Removal/Installation

DSC Off Switch Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the switch panel in the direction of the arrow shown in the illustration.
  2. Disconnect the connector.
    Fig 1: Removing Switch Panel
    G06733278Courtesy of MAZDA MOTORS CORP.
  3. Remove the DSC OFF switch in the direction of the arrow (2) shown in the illustration while pressing the tabs in the direction of the arrow (1).
  4. Remove the DSC OFF switch.
  5. Install in the reverse order of removal.
    Fig 2: Removing DSC OFF Switch
    G06733279Courtesy of MAZDA MOTORS CORP.
About FixVault