Circuit Open/Short Inspection

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the PCM connector.
Disconnect the SSV switch connector.
Inspect the following wiring harnesses for open or short circuit. (Continuity inspection)

Fig 1: Identifying Secondary Shutter Valve (SSV) Switch And PCM Connector Terminals

Courtesy of MAZDA MOTORS CORP.

Open circuit

If there is no continuity in the following wiring harnesses, there is an open circuit. Repair or replace the wiring harness.

SSV switch terminal A and PCM terminal 2AE
SSV switch terminal B and body ground

Short circuit

If there is continuity in the following wiring harnesses, there is a short circuit. Repair or replace the wiring harness.

SSV switch terminal A and body ground
SSV switch terminal A and power supply