Secondary Shutter Valve (SSV) Switch Removal/Installation
WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
- Disconnect the negative battery cable.
- Remove the battery. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
- Remove the air control valve. (See SECONDARY AIR INJECTION (AIR) CONTROL VALVE REMOVAL/INSTALLATION .)
- Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [13B-MSP] .)
- Disconnect the SSV switch connector.
- Remove the SSV installation screws and remove the SSV switch.
- Install in the reverse order of removal.