Hood Latch And Release Lever Removal/Installation: Notes

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

To remove the hood latch, remove the seal plate. (Refer to FRONT BUMPER REMOVAL/INSTALLATION in appropriate Body Panels article .)
Remove in the order indicated in the table.

Fig 1: Hood Latch And Release Lever Replacement Components With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.
Adjust the hood. (Refer to HOOD ADJUSTMENT in appropriate Body Panels article .)