FixVault
Home › Mazda › 2011 › 3 Mazdaspeed, 2.3 3 › Repair and Diagnosis › External Pages › Different car › Section 652 (Security System And Locks System) › Trunk Lid Open Cancel Switch Removal/Installation

Trunk Lid Open Cancel Switch Removal/Installation

WARNING: This page is about a different car, the 2011 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
  4. Disconnect the trunk lid opener cancel switch connector.
  5. Remove the trunk lid opener cancel switch.
  6. Install in the reverse order of removal.
Fig 1: Identifying Trunk Lid Open Cancel Switch And Connector
G04928938Courtesy of MAZDA MOTORS CORP.
About FixVault