FixVault
Home › Mazda › 2011 › 3 Mazdaspeed, 2.3 4 › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation › Rear Inner Handle

Rear Inner Handle

  1. Disconnect the negative battery cable.
  2. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION ).
  3. Disconnect each cable and remove the rear inner handle.
  4. Install in the reverse order of removal.
    Fig 1: Identifying Rear Inner Handle And Cable
    G06200874Courtesy of MAZDA MOTORS CORP.
About FixVault