FixVault
Home › Mazda › 2011 › 3 i SV, 2.0 F › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Main Fuse Removal/Installation

Main Fuse Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove nuts A and B shown in the figure.
  3. Remove the main fuse.
  4. Install in the reverse order of removal.
    Fig 1: Locating Main Fuse With Torque Specifications
    G06733167Courtesy of MAZDA MOTORS CORP.
About FixVault