FixVault
Home › Mazda › 2011 › 3 i SV, 2.0 F › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Abs HU/Cm Inspection › Notes

Abs HU/Cm Inspection: Notes

  1. Disconnect the ABS HU/CM connector. (See ABS HU/CM REMOVAL/INSTALLATION ).
  2. Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  3. Attach the tester lead to the ABS HU/CM wiring harness-side connector and inspect the voltage, continuity, or resistance according to the standard (reference value) in the table below.
About FixVault