FixVault
Home › Mazda › 2011 › 3 i SV, 2.0 F › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Buckle Removal/Installation

Front Buckle Removal/Installation

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION ).
  4. Remove the bolt.
  5. Remove the front buckle.
  6. Install in the reverse order of removal.
    Fig 1: Removing Front Buckle Bolt With Torque Specifications
    G06731714Courtesy of MAZDA MOTORS CORP.
About FixVault