FixVault
Home › Mazda › 2011 › 6 i Touring Plus › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation › Front Inner Handle

Front Inner Handle

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
    Fig 1: Door Lock Switch And Connector
    G07622057Courtesy of MAZDA MOTORS CORP.
  5. Disconnect each cable and remove the front inner handle.
  6. Install in the reverse order of removal.
Fig 2: Door Lock Knob Cable, Inner Handle Cable And Front Inner Handle
G07622058Courtesy of MAZDA MOTORS CORP.
About FixVault