FixVault
Home › Mazda › 2011 › 6 s Touring Plus › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Keyless Antenna Removal/Installation [Advanced Keyless Entry And Push Button Start System] › Vehicle Exterior, Rear

Vehicle Exterior, Rear

  1. Disconnect the negative battery cable.
  2. Remove the nuts.
  3. Disconnect the connector.
  4. Remove the keyless antenna.
  5. Install in the reverse order of removal.
Fig 1: Keyless Antenna, Connector And Nut With Torque Specification (Vehicle Exterior, Rear)
G07622175Courtesy of MAZDA MOTORS CORP.
About FixVault