FixVault
Home › Mazda › 2011 › 6 s Touring Plus › Repair and Diagnosis › Body & Frame › Seats › Seat System › Position Memory Switch Removal/Installation

Position Memory Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front seat side cover. (See FRONT SEAT SIDE COVER REMOVAL/INSTALLATION .)
  3. Remove the screws, then remove the position memory switch.
  4. Disconnect the position memory switch connector.
  5. Install in the reverse order of removal.
    Fig 1: Screws, Connector, Front Seat Side Cover And Position Memory Switch
    G07622022Courtesy of MAZDA MOTORS CORP.
About FixVault