FixVault
Home › Mazda › 2011 › 6 s Touring Plus › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System › DSC HU/Cm Removal/Installation › DSC HU/CM Removal Note

DSC HU/CM Removal Note

  1. Move the DSC HU/CM component towards the inner side of the vehicle.
  2. Loosen the bolt as shown in the illustration.
  3. Move the DSC HU/CM as shown in the illustration.
  4. Remove the DSC HU/CM from the DSC HU/CM Bracket.
Fig 1: Removing DSC HU/CM From DSC HU/CM Bracket
G06205582Courtesy of MAZDA MOTORS CORP.
About FixVault