FixVault
Home › Mazda › 2011 › CX-7 i SV, 2.5 5 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System [L5] › Manifold Absolute Pressure (Map) Sensor Removal/Installation

Manifold Absolute Pressure (Map) Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the MAP sensor connector.
  3. Remove the MAP sensor.
  4. Install in the reverse order of removal.
    Fig 1: Locating MAP Sensor And Screw
    G06724908Courtesy of MAZDA MOTORS CORP.
About FixVault