FixVault
Home › Mazda › 2011 › CX-7 i SV, 2.5 M › Repair and Diagnosis › Body & Frame › Windows › Glass/Windows/Mirrors › Power Window Motor Removal/Installation › Front Power Window Motor

Front Power Window Motor

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  3. Remove the bolts.
    Fig 1: Locating Front Power Window Motor Bolts With Torque Specifications
    G06726096Courtesy of MAZDA MOTORS CORP.
  4. Remove the front power window motor from the power window regulator.
  5. Disconnect the power window motor connector.
  6. Install in the reverse order of removal.
    NOTE:
    • When installing the front power window motor to the front power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the front door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the front power window motor to the drum.
About FixVault