FixVault
Home › Mazda › 2011 › CX-7 i SV, 2.5 M › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Buckle Removal/Installation

Front Buckle Removal/Installation

  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Detach the tab as shown below and remove the connector from the front seat connector.
    Fig 1: View Of Front Buckle Connector & Front Seat Connector
    G04860851Courtesy of MAZDA MOTORS CORP.
  5. Remove in the order as indicated below.
  6. Install in the reverse order of removal.
    Fig 2: Locating Front Buckle Connector With Torque Specifications
    G06725998Courtesy of MAZDA MOTORS CORP.
About FixVault