FixVault
Home › Mazda › 2011 › CX-7 s Touring, 2.3 3, AWD › Repair and Diagnosis › Body & Frame › Windows › Glass/Windows/Mirrors › Power Window Motor Inspection › Front Power Window Motor

Front Power Window Motor

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the front power window motor connector.
  4. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the front power window motor operation.
    Fig 1: Front Power Window Motor Circuit Diagram
    G06726098Courtesy of MAZDA MOTORS CORP.
    • If the front power window motor does not operate as indicated in the table in the illustration, replace it.
      CAUTION:
      • If the front power window motor temperature is high, the motor may not rotate due to the motor internal bimetal function. Leave it untouched for about 3 min to cool it down, then reinspect.
      TERMINAL REFERENCE CHART

      Operation Terminal
      F E
      Open B+ Ground
      Close Ground B+
  5. Connect the battery positive voltage to front power window motor terminal D and connect terminal C to ground.
  6. Operate the front power window motor and measure the voltage at terminals A and B.
    • If there is any malfunction, replace the front power window motor.

    Voltage 

    • Pulse: max. 12 V/min. 0 V 
About FixVault