FixVault
Home › Mazda › 2011 › CX-9 Touring, 3.7 A, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Advanced Key Id Code Registration [Advanced Keyless Entry And Start System] › Using M-MDS

Using M-MDS

  1. Fully lower the driver-side door glass.
  2. Connect the M-MDS to the DLC-2.
    3. Fig 1: Identifying DLC-2 Connector Location
    G04970771Courtesy of MAZDA MOTORS CORP.
  3. Set the M-MDS outside the vehicle with its cable passing through the door glass opening.
    CAUTION:
    • Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.
  4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Body".
      2. Select "Security".
      3. Select the "PATS Function".
  5. Select the following from the screen menu.
    1. Select "Program Additional card key".
  6. Perform the security access according to the directions on the M-MDS screen.
About FixVault