FixVault
Home › Mazda › 2011 › CX-9 Touring, 3.7 A, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Security Access Procedure

Security Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Body"
      2. Select "Security"
    • When using the PDS (Pocket PC)
      1. Select "All Tests and Calibrations".
  3. Then, select items from the screen menu in the following order.
    1. Select "PATS Function"
      Fig 1: Identifying DLC-2 Connector Location
      G04970771Courtesy of MAZDA MOTORS CORP.
  4. Select the items to be performed from the following:
    • Program Additional card key
    • Card Key Code Erase and Program
    • Steering Lock Unit Programming
    • Program additional ignition key
    • Ignition Key Code Erase and Program
    • Customer Spare Key Programming Enable
    • Customer Spare Key Programming Disable
    • Parameter Reset
  5. The security access begins and the M-MDS displays the "OUT-CODE"
    NOTE:
    • When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".
  6. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
  7. If the security access is successful, selected item can be performed.
About FixVault