Common Specifications & Procedures
CX-9 COMMON SPECIFICATIONS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | HVAC TECHNICAL DATA | ||
| Torque | See Torque Specifications in text and appropriate graphics in HVAC SYSTEM - BASIC SYSTEM (HVAC) article. | ||
| Axle Nut/Hub Nut | |||
| Front | 174-202 Ft. Lbs. (235-275 N.m) | ||
| Rear | 174-202 Ft. Lbs. (235-275 N.m) | ||
| Battery | BATTERY INSPECTION [MZI-3.7] | ||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF AIR BLEEDING |
||
| Disc Brakes | |||
| Service Specifications | BRAKES TECHNICAL DATA | ||
| Torque | See Torque Specifications in text and appropriate graphics in BRAKE SYSTEM - CONVENTIONAL BRAKE SYSTEM article. | ||
| Charging | |||
| Generator | GENERATOR INSPECTION [MZI-3.7] | ||
| Torque | See Torque Specifications in text and appropriate graphics in CHARGING SYSTEM [MZI-3.7] article. | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT AUTO TENSIONER INSPECTION [MZI-3.7] | ||
| Belt Routing | See Torque Specifications in text and appropriate graphics under DRIVE BELT REMOVAL/INSTALLATION [MZI-3.7] . | ||
| Engine Cooling | |||
| General Service Specifications | ENGINE - TECHNICAL DATA (ENGINE) [MZI-3.7] | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | THERMOSTAT REMOVAL/INSTALLATION [MZI-3.7] | ||
| Water Pump R & I | WATER PUMP REMOVAL/INSTALLATION [MZI-3.7] | ||
| Engine Mechanical | |||
| 3.7L V6 | |||
| Compression | COMPRESSION INSPECTION [MZI-3.7] | ||
| Oil Pressure | 45.0-90.0 psi (310-621 kPa; 3.17-6.33 kg/cm2 at 2, 000 RPM | ||
| Overhaul | ENGINE - TECHNICAL DATA (ENGINE) [MZI-3.7] | ||
| Torque | See Torque Specifications in text and appropriate graphics in ENGINE - MECHANICAL [MZI-3.7] article. | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 54-64 Ft. Lbs. (73-87 N.m) | ||
| Fuel System | |||
| Pressure Specification | 48.1-70.3 psi (331-485 kPa; 3.38-4.94 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL LINE PRESSURE INSPECTION [MZI-3.7] | ||
| Fuel Filter Location | Fuel filter is attached to fuel pump unit in fuel tank. | ||
| Fuel Filter R & I | FUEL PUMP UNIT REMOVAL/INSTALLATION [MZI-3.7] | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Routing) | 3.7L engine has coil-on-plug ignition. | ||
| Spark Plug | |||
| 3.7L V6 (NGK CY01 18110 or Motorcraft AYFS 22FM) | |||
| Gap | 0.051-0.057 in. (1.29-1.45 mm) | ||
| Torque | 79-177 In. Lbs. (9-20 N.m) | ||
| Starting | |||
| Starter | STARTER INSPECTION [MZI-3.7] | ||
| Torque | See Torque Specifications in appropriate graphics under STARTER REMOVAL/INSTALLATION [MZI-3.7] . | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | FRONT WHEEL ALIGNMENT | ||
| Rear | REAR WHEEL ALIGNMENT [2WD] or REAR WHEEL ALIGNMENT [AWD] | ||
| Torque | See Torque Specifications in text in WHEEL ALIGNMENT article. | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 80-108 Ft. Lbs. (108-147 N.m) | ||