FixVault
Home › Mazda › 2011 › CX-9 Touring, 3.7 V, AWD › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System/Roll Stability Control System › DSC/RSC HU/Cm Removal/Installation › DSC/RSC HU/CM Component Installation Note

DSC/RSC HU/CM Component Installation Note

  1. Insert the DSC/RSC HU/CM bracket tab to the vehicle frame hole as shown in the illustration.
  2. Install the DSC/RSC HU/CM component.
    Fig 1: Identifying DSC/RSC HU/CM Bracket
    G04970210Courtesy of MAZDA MOTORS CORP.
About FixVault